Powder-coated steel frame
Toughened glass table top
H74 x W90 x D90cm
BAMBRICK
SQUARE TABLE
INSTRUCTION MANUAL
IMPORTANT: Please read these instructions before using the product and retain for future use.
HHGL Limited, MK9 1BA, HHGL (ROI) Limited, D02 X576
2
SAFETY & CARE ADVICE
IMPORTANT INFORMATION
Please read these instructions fully before starting assembly.
• This product is made from toughened glass, which is strong but not unbreakable. In the unlikely
event that the glass fails, it will break into a large number of small fragments that may be spread over
a wide area. This is a feature of toughened glass, and is designed to remove the risk of injury from
glass breaking into large shards.
• If the glass is chipped or broken, stop using the product.
• Tables should not be dragged at any time.
• Do not strike or place heavy weight on the table.
• Do not place hot items directly onto the glass.
• Avoid dropping objects on the glass, as this may weaken or shatter it.
• Do not use the glass as a chopping surface.
• Do not strike the glass with hard or pointed items.
• Check you have all the components and tools listed in this booklet before assembly.
• Remove all fittings from their plastic bags and separate them into their groups.
• Keep children and animals away from the work area; small parts could choke if swallowed.
• Make sure you have enough space to lay out the parts before starting.
• Do not stand or put weight on the component parts during assembly, as this could cause damage.
• Assemble on a soft, level surface to avoid damaging the table or your floor.
• We recommend a two-person assembly.
• Dispose of all packaging carefully and responsibly.
• Regularly check all the bolts, screws and fastenings are secure.
• Only clean using a damp cloth and mild detergent; do not use bleach or abrasive cleaners.
R u le r - U s e th is rule r to h e lp corre ctly ide ntify th e s cre w s
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
3
COMPONENTS - FITTINGS
Please check you have all fittings listed
below. If you have any missing or
damaged fittings, please contact your
local store.
Note: The quantities below are the correct
amount to complete the assembly. In some
cases, more fittings may be supplied than
required.
Allen key
Tools included
F
1
Please check you have all components
listed below. If you have any missing or
damaged components, please contact
your local store.
COMPONENTS - PANELS
A
Glass top
Table rim
Table legs
B
C
1
1
4
Washers
Screws
D
E
8
M6x20
8
ASSEMBLY INSTRUCTIONS
Step 1
Fit the four table legs C to the table frame B, using screws D and washers E with allen key F.
Step 2
Carefully place the glass top A onto the table.
C
B
D
A
E
ASSEMBLY COMPLETE
